virtins.com

The attenuator was designed by sankenpower. Unfortunately, I do not have a copy of it.

Do you sell x100 probe?

Smith.A

Post at 30-7-2013 07:39

Yes. It is now listed in our online store.
virtins
Post at 10-9-2013 09:21

MI will not run

I have two copies of MI on two different computers at the company I work for. Suddenly, both copies stopped working. Automation control from Visual Basic does not work. Double-clicking the icon does not work either. The program does not open at all. One of the computers has the ...

Power spectral densityIs it possible to configure the multi instrument so it displays the psd(power spectral density) of the signal? The instrument I want to replace is a big Dynamic signal analyzer that gives me the PSD directly. I have been searching the web for a simple answer how to directly ...

Energy in user defined frequency band

If I want to use this option in parameter measurement, at processing Spectrum Analyzer Properties, than I can define the two frequencys for a certain band, but I cannot see this in a smaller spectrum, and I also cannot see the result in a reduced dB(A) level in ...

Spectrum 3D Plot of Wave File

After loading in a wave file and noticing the resulting analysis in the oscilloscope and spectrum analyzer windows, if I then enable the 3D spectrum plot, it seems to plot only one sample and then stop. How does one perform a spectrum 3D plot of a entire wave file ...

MI-Automation and Multimeter

Is there a way, with automation code, to return/export the value of the multimeter?

cihequipment
Post at 28-6-2011 21:15

GetDDP() can be used to retrieve the value of any DDP (Derived Data Point) in real time. Please refer to Multi-Instrument Automation Server ...

dll for dso-5200A
make a dll is very difficult for those unfamiliar with the language of c. Do you could put the source of one of your DSO, for example the VT-DSO-2815H

Signal Generator Noise

When viewing a sine wave output from the signal generator on a separate dedicated o-scope I notice a significant amount of high frequency noise imposed on the waveform. I also notice that the spectrum analyzer displays peaks at non harmonic frequencies of the signal generator ...

Signal Generator

I am trying to use the Signal Generator to produce a 24 kHz signal so that I can tune a VLF aerial I have just built.

I have set the sampling rate on the Signal Generator to 9600 kHz and it appears to be generating a 24 kHz signal - at least there is no error message.

However ...